Wichita Falls Tub RefinishingWichita Falls, TX
Ventilation and containment — Wichita Falls, TX

A MESSAGE FROM TEXAS'S #1 WICHITA FALLS TUB REFINISHING TEAM:

Wichita Falls, TX homeowner,

Hey there, we're Wichita Falls Tub Refinishing – Texas's top tub refinishing company.

We refinish bathtubs, tile and vanity tops in place — stripped, repaired, primed and sprayed with a coating that cures hard. It takes a day rather than a week, and it costs a fraction of replacement because nothing gets torn out. We work across Wichita Falls and the towns around it.

Here is what usually brings people to us

The tub is worn, stained or the wrong colour, and the bathroom looks dated because of it. Replacing it means tile, plumbing and a bathroom out of action for days — and in most houses the tub itself is structurally fine. You are paying to change a surface, not a fixture. You want somebody who turns up, tells you straight what it needs, and does it properly the first time. The typical Wichita Falls property dates to around 1971, so the housing stock here is mostly seventies and eighties. With July highs near 97°F, heat and sun exposure age this work faster than the brochure says.

And here is our guarantee. Our team will never:

  • Throw technical terms at you to sound clever
  • Push you into buying something you do not need
  • Pressure you for a decision on the spot
  • Hit you with fees that were never mentioned
  • Disappear halfway through the job
  • Get defensive when you ask what we did and why
  • Be impossible to get hold of afterwards

Get a free quote

Tell us what you need. We will come look at it and put a price in writing – no charge, no pressure.

Give us a phone number or an email so someone can reach you. Not for emergencies — call 911.

What you get at no charge

Somebody on site, not a guess

We come and look at what you actually have, and measure it, rather than pricing it off a photograph you sent.

An itemised quote

It says what is included and what is not, which is the only way to hold two quotes side by side and read them honestly.

The truth about timing

If this can wait a season, we will say so. If it is worse than you thought, you will hear that from us first.

Wichita Falls bathtub and tub refinishing services

You might know this as bathtub refinishing. Same work, either name. Everything below is work we handle directly, not passed to a third party.

The coatings and stripping agents give off strong fumes — Wichita Falls, TX

Ventilation and containment

The coatings and stripping agents give off strong fumes. Proper work means forced-air exhaust, masking of the room, and a respirator. This is the step most often skipped on cheap jobs.

Any previous refinish coating has to come off completely — Wichita Falls, TX

Stripping and repair

Any previous refinish coating has to come off completely. Chips, rust-through spots, and cracks get filled and faired before anything is sprayed, because the coating follows the shape underneath.

Glazed porcelain is deliberately non-porous, so it is chemically etched or abraded to give the — Wichita Falls, TX

Etching the surface

Glazed porcelain is deliberately non-porous, so it is chemically etched or abraded to give the primer something to grip. Skipping or rushing this is the single biggest cause of failure.

Old caulk is cut out, drain and overflow trim comes off, and the surrounding tile is masked — Wichita Falls, TX

Caulk and hardware removal

Old caulk is cut out, drain and overflow trim comes off, and the surrounding tile is masked. Coating sprayed over caulk peels along that line within months.

A bonding primer suited to the substrate goes down first, then multiple thin sprayed coats of — Wichita Falls, TX

Primer and topcoats

A bonding primer suited to the substrate goes down first, then multiple thin sprayed coats of acrylic urethane or a similar two-part coating, each flashed off before the next.

Hardware and fresh caulk go back after the coating has set — Wichita Falls, TX

Cure and reassembly

Hardware and fresh caulk go back after the coating has set. Most systems need 24 to 72 hours before water contact, and longer before heavy use.

Have a look at our tub refinishing work

A cross-section of the jobs we handle around Wichita Falls — different sizes, different conditions, same standard.

Why choose us

Local to Wichita Falls

We work Wichita Falls and the towns around it every week. We also cover Burkburnett, Iowa Park, Pleasant Valley, Holliday, Dean, Cashion Community, Jolly and Lakeside City. We know what the buildings here are like and how they age.

Licensed and insured

The crew on your job is licensed, insured, and on our books – we do not hand your work to a subcontractor and hope.

We do this specific work

We do tub refinishing specifically. It is not an add-on to a general contracting business. The tub is identified as cast iron, steel, fiberglass or acrylic, and checked for previous refinishing, rust-through, and flex in the floor of the tub. That determines the whole approach.

Clear pricing

You get the number before the work starts, and it does not move unless something is found that changes the job – which we show you first.

Wichita Falls tub refinishing: the questions people actually ask

What services do you offer?

Anything to do with tub refinishing. To start with: ventilation and containment, stripping and repair, etching the surface, caulk and hardware removal, primer and topcoats, cure and reassembly. If you need something that is not on that list, call and ask – we can usually quote it or tell you honestly who should.

Where do you serve?

We cover Wichita Falls, TX and the surrounding towns – Burkburnett, Iowa Park, Pleasant Valley, Holliday, Dean, Cashion Community, Jolly, Lakeside City, Scotland, Henrietta, Electra, Windthorst, Archer City, Byers, Grandfield, Petrolia, Randlett, Devol, and more. If you do not see your town listed, call anyway and we will tell you straight whether we can get to you.

What options do you offer?

Ventilation and containment – The coatings and stripping agents give off strong fumes. Proper work means forced-air exhaust, masking of the room, and a respirator. This is the step most often skipped on cheap jobs.; Stripping and repair – Any previous refinish coating has to come off completely. Chips, rust-through spots, and cracks get filled and faired before anything is sprayed, because the coating follows the shape underneath.; Etching the surface – Glazed porcelain is deliberately non-porous, so it is chemically etched or abraded to give the primer something to grip. Skipping or rushing this is the single biggest cause of failure.. Which one is right depends on what we find when we look at it, and we will walk you through the trade-offs rather than picking for you.

What is the most popular tub refinishing service?

Ventilation and containment is the one we are asked about most often in Wichita Falls. The coatings and stripping agents give off strong fumes. Proper work means forced-air exhaust, masking of the room, and a respirator. This is the step most often skipped on cheap jobs.

How much will this cost?

Most jobs land between $300 and $2,200 per tub, or tub plus surround, depending on condition and scope. We come out, look at it, and give you a written estimate at no charge. We are not the cheapest outfit in Wichita Falls and we will not pretend to be – but you will know exactly what you are paying for before anything starts.

What makes the price go up or down?

Tub material: Cast iron, porcelain-over-steel, fiberglass, acrylic and cultured marble each need a different prep sequence and primer. Fiberglass in particular flexes, which changes the coating choice and the risk. That is usually the biggest single swing in a quote, which is why we look before we price.

Do you guarantee the work?

Yes. We stand behind what we do and we put the terms in writing with the estimate, so the guarantee is not a handshake you have to remember later.

Sounds good. How do we begin?

Call us at (940) 298-1619, or fill in the quote form on this page. We will get back to you, set a time that suits, and come look at the job.

Ready to sort the tub refinishing?

Free estimate, in writing, from a Wichita Falls team that does this every day.

From the tub refinishing team Wichita Falls calls first – thanks for stopping by.

Call us whenever suits. We handle every size of job, residential and commercial, across Wichita Falls and the towns around it.

Your partner,
Wichita Falls Tub Refinishing

Tap to call (940) 298-1619